DISCOVERY TX-500 MILITARY STYLE-PORTABLE-TRANSCEIVER
Tax included.
DISCOVERY TX-500 MILITARY STYLE-PORTABLE-TRANSCEIVER
LAB 599 Discovery TX-500 – Military Style Portable Transceiver - Made in UAE
Tailored for adventure, for extremes, for using in places unattainable before, with no sacrifice of performance or features.
The Lab599 Discovery covers 160-6 meters, all modes, with a maximum power output of 10 W. It comes with true desktop-radio features, like auto-notch, noise reduction, and RX/TX EQ.
The transceiver has a built-in fast Panadaptor, for easier search for new contacts and evaluation of band conditions wherever you are, at any time.
Features:
- 
Splash proof and Dustproof Portable Software-Defined Radio
 - 
160-6-meter ham bands
 - 
General ‘receive’ coverage 0.5 - 56.0MHz
 - 
All modes: SSB, CW, DIG, AM, FM
 - 
High-performance 32-bit floating-point DSP
 - 
Current drain as low as 100 mA in ‘receive’ mode (backlight on, preamp off, no signal)
 - 
External power supply DC 9-15V, 1 to 3A typical in transmit
 - 
High-contrast LCD with 256×128px
 - 
High-performance real-time Panadaptor (48 kHz wide)
 - 
On-line firmware updates
 - 
Rear folding kickstands for viewing angle and transportation
 - 
Ultra-compact size (H×W×D): 90mm (3.5") × 207mm (8.1") × 21mm (0.8 ")
 - 
Weight: 0.55Kg (19,4oz).
 - 
Adjustable output power 1—10W
 - 
Digital Hi-Performance Filtering (4 receive, 2 transmit)
 - 
48 kHz Build-in HI Speed Panadaptor
 - 
I/Q Output
 
Built-in Panadaptor - The transceiver features a built-in high-performance Panadaptor, for better search for new contacts and evaluation of band conditions — wherever you are, at any time. In receive mode, current drain can be as low as 100 mA — a unique feature on the market. Transmit efficiency is also excellent, with improved battery life.
Unique form-factor - The Lab599 Discovery unique form-factor allow operate from anywhere. The transceiver is only 30 mm thick, including knobs, weighing only 0.55 kg. Fold out the kickstands at the rear for use on a desktop or picnic table.
11 Discrete RF Bandpass Filters - Discovery TX-500 has 11 discrete RF bandpass filters. The RF signal is only passed through one of the band-pass filters — any out-of-range signals are rejected.
Aluminium Alloy Body - The transceiver's body is made of durable aluminium by the method of precision milling, to ensure a unique shock protection and provide good heat removal from the output part of the transmitter.
Well Shielded Inner Units - To achieve high sensitivity of the transceiver, separate functional units are isolated from mutual influence and external interference by partitioning walls installed in the device case.
Dust and Liquid Protection - Thanks to the liquid-protected housing and the absence of through-holes, spatter resistant plugs, valcoders with sealing rings, the transceiver will work reliably in extreme conditions, giving you real pleasure from traveling. The case is also covered with a layer of black anodizing substance, to maintain an attractive appearance for a long time, even during extreme operation.
Other Features:
- 
Internal CW keyer with 10-300СPM range
 - 
100 general-purpose memories store VFOs, modes, etc.
 - 
CW keyer memory with 4 cells for 20 seconds each
 - 
Voice message memory with 2 cells for 20 seconds each
 - 
Computer control via USB
 - 
Full remote-control command set (with Kenwood emulates)
 - 
One-click online firmware upgrades (with free PC software)
 
Included in Box:
- 
Speaker-microphone
 - 
CAT cable for on-line software update
 - 
Power cable for external power source DC 9 -15V (battery not included)
 - 
Headset and mic adapter with PTT (3.5mm jack)
 - 
CW adapter (3.5mm jack)
 - 
Additional connector GX12 type, 7 pins
 
Receiver* Specifications:
- 
Sensitivity: Noise Floor (MDS), 500 Hz DSP filter: –141 dBm (14 MHz, Preamp-on)
 - 
Blocking Gain Compression Dynamic Range, 500 Hz. BW: 129 dB (14 MHz, 2 kHz offset, Preamp-off)
 - 
Reciprocal Mixing Dynamic Range: 14 MHz, 20/5/2 kHz, offset: 119/108/106 dB
 - 
Quadrature down-sampling mixer compatible with PC-based SDR (software defined radio) applications
 - 
Receiver I / Q outputs for PC soundcard
 - 
Switchable low-noise preamp and attenuator
 - 
3-band receive audio equalizer
 - 
4 adjustable digital filters
 - 
Automatic notch filtering
 - 
Adjustable noise reduction and noise blanking
 - 
Audio Output ext. speaker, 3W typ.
 
Transmitter* Specifications:
- 
Adjustable output, 1 to 10W PEP
 - 
Rugged, SWR and temperature-protected final amplifier stage
 - 
Carrier Suppression > 50dB typ.
 - 
Harmonic / Spurious Outputs > 50dB below carrier
 - 
CW Sidetone/Transmit offset 400-1200Hz, adjustable
 - 
Speaker-microphone with PTT
 - 
3-band microphone audio equalizer
 - 
2 adjustable digital filters
 - 
DSP RF speech processing for excellent 'punch'