ANYTONE APOLLO II MOBILE CB TRANSCEIVER EU UK40
Tax included.
ANYTONE APOLLO II MOBILE CB TRANSCEIVER EU UK40
Anytone Apollo II - Mobile CB Transceiver
New High Power version up to 30W output when in expanded mode.
The radio can be changed to Export mode for use on 10m - 11m and covers approx 25-30MHz
PLEASE REQUEST INFORMATION.
Features:
-
FTF LCD display
-
12/24V voltage (4W version only)
-
Full alloy body for heat radiation
-
Programmable keypad
-
CTCSS/DCS (optional)
-
Wireless microphone control(optional)
-
Cell-phone APP control (optional)
-
AM/FM multi norms
-
Flexible menu and programming software
-
DTMF
-
SQ, ASQ
-
SQ, ASQ open/close value setting
-
RF Gain
-
Scan
-
Dual watch
-
Programmable RB
-
CH9/19
-
NB
-
HI-CUT
-
Voltage protection
-
8 memory channel
-
TOT
-
Backlight control
-
Automatic power on
-
Keypad lock
Included in Box:
-
Radio
-
Microphone
-
Screws
-
Pads
-
Adjusting screws
-
Microphone Hanger
-
Install bracket
-
Non-slip mat
-
Fuse(5A 250V)
General Specifications:
-
Modulation Mode: AM/FM
-
Frequency Range: 26.565 ~ 27.99125MHz (FM), 26.965 ~ 27.405MHz (AM)
-
Frequency Tolerance: ±5.0ppm
-
Input Voltage: 12/24V
-
Dimensions(mm): 124(W) x 163(D) x 39(H)
-
Weight(approx.): 670g
-
Frequency Control: PLL Synthesizer
-
Operating Temperature Range: -20°C TO + 55° C
-
Current Drain: Transmit: 2A MAX, Receive: Squelched 0.3A, VOL Max: 0.8A
-
Antenna Connector: UHF, SO-239
Transmitter Specifications:
-
Power Output: 4 Watts FM/AM
-
Transmission Interference: inferior to 4nW(-54dBm)
-
Frequency Response: 300-3000Hz
-
Modulated Signal Distortion: inferior to 5%
-
Output Impedance: 50 Ohms
Receiver Specifications:
-
Sensitivity: Less than 1uV for 10dB(S+N)/N
-
Image Rejection: 70dB
-
Adjacent Channel Rejection: 60dB
-
IF Frequencies: 1st 10.695MHz, 2nd 455KHz
-
Automatic Gain Control (AGC): Less than 10dB change in audio, Output for inputs from 10 to 50000uV
-
Squelch: less than 1uV
-
Audio Output Power: 3 watts into 8 ohms
-
Frequency Response: 300-3000Hz