ALINCO DX 10 Ham CB Radio SSB PRE Programmed + ML 70 Magmount

ALINCO DX 10 Ham CB Radio SSB PRE Programmed + ML 70 Magmount

DX 10 &  DX 135 are same radio.

WE PRE PROGRAMED BANDS

BAND A: 25.615 TO 26.055

BAND B: 26.065 TO 26.505

BAND C: 26.515 TO 26.955

BAND D: 26.965 TO 27.405

BAND E: 27.415 TO 27.855

BAND F: UK 40

All mode AM/FM/SSB mobile transceiver from Alinco. 

Frequency range (default) 28.000 - 29.700 MHz 

Max Frequency range - 25.000-29.90 MHz (programmable for export use) 

Power Output 1-12 watts FM/FM/CW 0-25 watts USB/LSB 

Operating modes AM/CW/FM/LSB/USB Channel spacing 10 Hz/100 Hz / 1 kHz / 10 kHz 

Memory 40ch per band (up to 60 per band are programmable via optional software) 

Features & Functions Multi-colour display (7 selectable colours or rainbow mode) with backlight 

RF gain 

LCD S-meter 

SWR meter 

NB Noise Blanker and ANL function 

Clarifier for fine tuning PC programmable settings +10 KHz offset button 

Scanning features 

Dual Watch function 

External speaker socket (3.5mm) 

Jack for CW key CW Sidetone 300Hz-3kHz in 10 adjustable steps 

Hi-Cut function (RX tone) 

Keypad lock Programmable time-out timer 

Over-voltage protection 

PA facility 

Reset function 

Microphone connector - 6-pin 

Antenna connector PL-259 

Connector (SO239) 

Power requirements 13.8 VDC + / -15% 

Dimensions (WxHxD) 173 x 51 x 238 mm 

Weight 1.5 kg   

• PNI ML70 antenna performance The length of the antenna is a very important factor that can influence the distance of communication. Thus, the longer the antenna is, the longer the range is. The PNI ML70 antenna has a length of 70 cm (magnetic base included).Magnetic base

• The PNI 145 / PL magnetic base is provided with a 4 m cable, enough to seat the antenna on the dome, is 145 mm in diameter and a powerful magnet that provides the antenna with stability even at high speeds.

•  

• Length of the antenna

• The performance of the product is closely related to the technical characteristics of the antenna under ideal conditions of installation and use: SWR <= 1.2, maximum applied 200 W, impedance 50 Ohms, stainless steel etc.