Details
E5-portable headphone amplifier
Worldfs smallest metal case headphone amplifier
E5 is a Portable Headphone Amplifier designed to improve the sound quality and volume of any Digital Audio Player such as a MP3 or MP4 Player, Mobile Phone, Laptop, or Notebook. It is an upgraded model of E3 Headphone Amplifier which is very popular around the world. It retains all the advantages of the E3, and yet still has very small slim case! Now with a volume control so you can connect directly to the line out of a Digital Audio Player and control the volume directly!
But it is more than just an upgraded version of the E3! It has a higher power output, better Signal to Noise ratio and Lower Distortion! And with the new TIfs headphone amp solution, E5 have better sound qualilty and can work better with high impedance headphone. With a sound effect switch which will remove any Bass Boost., E5 will be a good pair with more different headphone.
Features
œDesigned for high impedance and low sensitivity headphones,
œEasy to carry and use in the outdoors
œIncreases your music player's play time
œNew amplifier IC, with higher S/N and lower distortion!
œVery high PSRR, and with metal case. Reduces the noise caused by GSM mobile phones! So you can now connect to a GSM music mobile phone!
œIndividual power switch;
œElectronic volume control, ( means very low distortion and avoids the adjustment noise caused by a potentiometer);
œTwo sound effects: Flat and bass boost mode;
œBuilt-in Rechargeable battery, gives about 20 hours playtime at normal volume;
œMini USB charger port!
œWith a built-in metal clip, you can clip the E5 onto anything !
Product Details:
Output Power: 100 mW (32 ohms Loaded) 18 mW (300 ohms Loaded)
Signal to Noise Ratio: = 98 dB (A Weight)
Power Supply: build-in 200mAh rechargerable battery
Frequency Response: 10 Hz - 60 kHz
Distortion: 0.009% (10 mW)
Voltage: USB DC5V
Brand Name: FiiO
Model Number: E5
Specifications
Output Power: 150 mW (16 ohms Loaded)
12 mW (300 ohms Loaded)
Signal to Noise Ratio: = 95 dB (A Weight)
Distortion: 0.009% (10 mW)
Frequency Response: 10 Hz - 100 kHz
Suitable Headphone Impedance: 16 ohms - 300 ohms
Weight: 30g
Power Supply: build-in 200mAh rechargerable battery
Dimensions: 44.2mm x 38 mm x 12.6 mm
Sound solution:
Pre-amp: OPA2338UA From TI (Texas Instruments)
Power-amp: TPA6130A From TI (Texas Instruments)
Main Accessory
15cm 3.5mm to 3.5mm audio line *1
